Follow AutoMusic
Overseas car markets, regulatory changes and competitor moves. New content is pushed on WeChat when published, with source links.
Federal Motor Vehicle Safety Standards (FMVSS), federal emissions and fuel economy rules, and California's separate requirements. Authorities: NHTSA, EPA, California Air Resources Board (CARB)
79 entries on this site: legislative updates 55 · current regulations 24. By area: safety 43 · emissions 22 · automated driving 7 · general compliance 6 · connectivity/data 1.
The Safer Affordable Fuel-Efficient (SAFE) Vehicles Rule III for Model Years 2022 to 2031 Passenger Cars and Light Trucks
SAFE Vehicles Rule III: resetting MY2022–2031 CAFE standards for passenger cars and light trucks: published 2026-09-30, effective 2026-11-30, compliance required from 2026-11-30.
In force 2026-11-30
Federal Motor Vehicle Safety Standards; Anti-Ejection Glazing for Bus Portals; Bus Emergency Exits and Window Retention and Release
FMVSS 217a Anti-ejection window glazing for buses (motorcoaches / large buses): published 2024-10-30, effective 2024-12-30, compliance required from 2027-10-30.
In force 2024-12-30; applies from 2027-10-30
Event Data Recorders
49 CFR 563 event data recorder (EDR) amendment: 20 seconds pre-crash, 10 Hz: published 2026-05-18, effective 2026-06-17, compliance required from 2028-09-01.
In force 2026-06-17; applies from 2028-09-01
Federal Motor Vehicle Safety Standards; Fuel System Integrity of Hydrogen Vehicles; Compressed Hydrogen Storage System Integrity; Incorporation by Reference
FMVSS 307 / 308 Fuel system integrity of hydrogen vehicles and compressed hydrogen storage system integrity (GTR 13): published 2025-01-17, effective 2025-07-16, compliance required from 2028-09-01.
In force 2025-07-16; applies from 2028-09-01
Federal Motor Vehicle Safety Standards; Automatic Emergency Braking Systems for Light Vehicles
FMVSS 127 Automatic emergency braking for light vehicles (AEB / pedestrian AEB): published 2024-05-09, effective 2024-07-08, compliance required from 2029-09-01.
In force 2024-07-08; applies from 2029-09-01
FMVSS 208 Occupant crash protection
US airbags, seat belts and crash dummy injury criteria: seat belt reminder amendment (90 FR 390, as adjusted by interim final rule 91 FR 17144). Seat belt reminders for front and rear seats become mandatory from 2028-09-01. Multi-stage manufacturers get an extra year, until 2029-09-01.
Temporary Exemption From Motor Vehicle Safety and Bumper Standards
49 CFR 555 Revision of FMVSS temporary exemption procedures (interim final rule): published 2026-07-31, effective 2026-07-31, compliance required from 2026-07-31.
In force 2026-07-31
EPA Heavy-Duty GHG Phase 3 (repealed effective 2026-04-20)
US HDV greenhouse gas Phase 3: ZEV share ramp-up over 2027–2032. Heavy-duty GHG Phase 3 (89 FR 29440, MY2027–2032) and all other heavy-duty GHG standards were repealed in full by 91 FR 7686 on 2026-04-20. The heavy-duty engine standards for NOx and other criteria pollutants from MY2027 under 88 FR 4296 remain in effect. On 2026-07-14, EPA published a proposal on revisions and nonconformance penalties, 91 FR 43154 (no final rule as of 2026-10-31).
Repealed: 91 FR 7686 (FR Doc. 2026-03157), effective 2026-04-20
US FMVSS Framework 49 CFR 571
US vehicle safety standards framework, the parent rule for all FMVSS standards. NHTSA 2026-06 issued a set of final rules cleaning up FMVSS text (204, 205, 206, 207, 210, 216a, 222, 301, 303, 304; 91 FR 33078–33116), effective 2026-07-06. They mainly remove obsolete provisions and adjust scope (e.g. 204 no longer applies to vehicles certified to 208 frontal crash requirements; 216 merged into 216a).
FMVSS 214 Side impact protection
US side impact MDB + pole crash — IIHS Top Safety Pick basis: 91 FR 33111 (effective 2026-07-06) only removes obsolete provisions, with no change to substantive requirements.
Removing Obsolete Directives From Phase-In Reporting Requirements
49 CFR 585 amendment to phase-in reporting requirements: published 2026-06-03, effective 2026-07-06, compliance required from 2026-07-06.
In force 2026-07-06
Administrative Rulemaking, Guidance, and Enforcement Procedures
49 CFR 553 NHTSA rulemaking procedures amendment: published 2026-04-27, effective 2026-05-27, compliance required from 2026-05-27.
In force 2026-05-27
EPA Tier 3 Light Vehicle Emissions
US EPA light-duty vehicle emissions + fuel economy — 2025 tightened. EPA 91 FR 7686 (effective 2026-04-20) rescinds the 2009 greenhouse gas endangerment finding and repeals all greenhouse gas emission standards for light-, medium- and heavy-duty vehicles and engines (amending 40 CFR 85/86/600/1036/1037/1039). The MY2027–2032 criteria pollutant (Tier 4) standards and battery durability requirements in 89 FR 27842 remain in place; a separate proposal, 91 FR 28463, would revise their phase-in schedule from 2026-05-18.
FMVSS 305 Electric powered vehicles
US EV electric shock protection + electrolyte spillage + post-crash electrical isolation. FMVSS 305a (89 FR 104318, effective 2025-03-20) replaces 305, covers light- and heavy-duty electric vehicles and adds traction battery performance requirements (GTR 20). The new 49 CFR Part 561 emergency response information applies from 2025-12-22; other requirements apply from 2027-09-01 for GVWR ≤4,536 kg and from 2028-09-01 for >4,536 kg, with a further one-year delay for small-volume/final-stage manufacturers and alterers.
Securing the Information and Communications Technology and Services Supply Chain: Connected Vehicles
BIS connected vehicles rule, prohibiting connected-vehicle system hardware and ADS/connectivity software linked to China or Russia: published 2025-01-16, effective 2025-03-17, compliance required from 2025-03-17.
In force 2025-03-17
FMVSS 108 Lamps reflective devices
US vehicle + replacement lamps: photometric performance / colour / intensity. The most recent substantive amendment was the 2022-02-22 adaptive driving beam (ADB) rule; petitions for reconsideration were denied on 2024-12-30, with no change to the text.
FMVSS 213 Child restraints
US child restraint system standards: LATCH anchorages and side impact testing. The compliance date for the FMVSS 213a side impact requirements is postponed to 2026-12-05 (91 FR 57265, effective 2026-10-09). The compliance date for the FMVSS 213a side impact requirements is postponed to 2026-12-05 (91 FR 57265, effective 2026-10-09). FMVSS 213b (88 FR 84514) updates the standard seat assembly for frontal crash testing, with mandatory compliance from 2026-12-05; related amendments to 213 apply from 2024-12-05.
FMVSS 141 Minimum EV sound
US minimum sound level for EVs/HEVs at low speed < 30 km/h — aligned with UN R138
FMVSS 111 Rear visibility
US: rear-view cameras mandatory on all vehicles < 4536 kg from 2018-05
FMVSS 121 Air brake systems
US HDV air brakes – equivalent to EU R13 but with different testing
FMVSS 126 ESC light vehicles
US M1 ESC mandate — fishhook / slalom tests
FMVSS 138 TPMS
US direct TPMS mandate for M1/N1 — 25% underinflation warning
CARB Advanced Clean Trucks / Cars II
California ZEV sales mandate — 17 states follow (Section 177 states)
NHTSA Recall Procedures
US NHTSA defect investigations + recall notifications + telematics recording obligations
Hercules Tire & Rubber Company, Grant of Petition for Decision of Inconsequential Noncompliance
The US National Highway Traffic Safety Administration (NHTSA) has granted a petition from Hercules Tire & Rubber Company, deciding that the noncompliance of certain Power ST2 radial trailer tires with FMVSS No. 119 (new pneumatic tires for vehicles with a GVWR over 4536 kg) is inconsequential to motor vehicle safety. The company filed a noncompliance report on Oct 5, 2022 and petitioned for an exemption on Oct 21, 2022.
WTO TBT G/TBT/N/USA/2323/Add.1 (United States of America) — Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles
The US has submitted notification G/TBT/N/USA/2323/Add.1 to the WTO TBT Committee, proposing to modernize Federal Motor Vehicle Safety Standard FMVSS No. 108 (lamps, reflective devices and associated equipment) to accommodate vehicles equipped with automated driving systems (ADS). The measure covers vehicle lighting and signaling products such as HS 8512.20. The comment deadline is Dec 10, 2026.
Agency Information Collection Activities; Notice and Request for Comment; 49 CFR Part 555, Temporary Exemption From Motor Vehicle Safety and Bumper Standards
Under Paperwork Reduction Act procedures, the US National Highway Traffic Safety Administration (NHTSA) has issued a notice seeking public comment on an information collection, "49 CFR Part 555: Temporary Exemption from Motor Vehicle Safety and Bumper Standards", for which it plans to request approval from the White House Office of Management and Budget (OMB). The collection covers the information vehicle manufacturers must submit when applying for temporary exemptions from federal safety standards.
Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles
At the request of the Alliance for Automotive Innovation, SAE International and Gatik, the US NHTSA has extended by 15 days the public comment period for the NPRM amending FMVSS No. 108 (lamps, reflective devices and associated equipment), published on Oct 26, 2026, moving the deadline from Nov 25, 2026 to Dec 10. The proposal seeks to differentiate the requirements applicable to ADS-equipped automated vehicles with and without manual driving controls.
Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Request for Comment; State Data Transfer (SDT)
Under the Paperwork Reduction Act, the US National Highway Traffic Safety Administration (NHTSA) has submitted the information collection request (ICR) for its "State Data Transfer (SDT) Vehicle Crash Information" program to the White House Office of Management and Budget (OMB) for review and approval, and is again seeking public comment. The earlier 60-day comment notice published on Jun 25, 2026 received 1 public comments.
Denial of Motor Vehicle Defect Petition, DP26-009
The US National Highway Traffic Safety Administration (NHTSA) has denied defect petition DP26-009 from Jason Rund. The petition asked NHTSA to investigate whether problems with the rear differential (final drive) assembly of 2022 BMW 540i vehicles cause the rear wheels to disconnect from the driveline. After a technical review, NHTSA's Office of Defects Investigation (ODI) concluded that the issue does not currently justify a defect investigation, and declined to open one.
Denial of Motor Vehicle Defect Petition, DP26-004
Petitioner Richard De Leon submitted defect petition DP26-004 to US NHTSA on Dec 22, 2025, requesting a safety defect investigation into the anti-lock braking system (ABS) hydraulic control unit (HCU) of model year 2010 Ford Fusion Hybrid vehicles, alleging that illumination of the ABS warning light is linked to HCU failure, resulting in loss of ABS, traction control and electronic stability control functions and reduced braking performance on slippery roads. Following a technical review, NHTSA concluded that the issues raised did not warrant a new defect investigation and denied the petition.
WTO TBT G/TBT/N/USA/2323 (United States of America) — Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles
The US has issued WTO TBT notification G/TBT/N/USA/2323. It proposes to modernise Federal Motor Vehicle Safety Standard No. 108 (lamps, reflective devices and associated equipment) to accommodate vehicles equipped with automated driving systems (ADS). Product codes include HS 8512.20 and ICS 43.020. The comment deadline is Nov 25, 2026.
Notice of Intent To Establish a Negotiated Rulemaking Advisory Committee for Tire Safety; Request for Comments and Solicitation of Nominations for Membership
The US National Highway Traffic Safety Administration (NHTSA) has issued a notice proposing a Tire Safety Advisory Committee, set up through negotiated rulemaking, to advise the Secretary of Transportation on tire safety. The committee will serve for no more than two years or until it submits its recommendations. The notice also invites public comment and nominations for committee members.
Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles
US NHTSA has issued a proposed rule to amend FMVSS No. 108 on lamps and reflective devices: requirements for manual turn signals, hazard warning signals, beam switching controls and related indicators would apply only to vehicles with manual driving controls, and vehicles equipped with an automated driving system (ADS) and no manual controls would be allowed to fit optional turquoise ADS marker lamps. The aim is to remove unnecessary regulatory burdens and costs for automated vehicles without reducing vehicle safety.
WTO TBT G/TBT/N/USA/2043/Add.3 (United States of America) — Part 572; Anthropomorphic Test Devices; Test Device for Human Occupant Restraint 50th Percentile Adult Male Dummy (THOR-50M); Extension of Comment Period
The US issued notification G/TBT/N/USA/2043/Add.3 through the WTO TBT Committee, extending the public comment period on draft Part 572 provisions for the THOR-50M (50th percentile adult male anthropomorphic test device, or crash test dummy). The new comment deadline is Nov 21, 2026. The dummy is used in safety testing of vehicle crash protection and occupant restraint systems.
Part 572; Anthropomorphic Test Devices; Test Device for Human Occupant Restraint 50th Percentile Adult Male Dummy (THOR-50M); Extension of Comment Period
At the request of the Alliance for Automotive Innovation, NHTSA has extended the public comment period for the supplemental notice of proposed rulemaking (SNPRM) published on Sep 22, 2026 by 30 days, moving the deadline from Oct 22, 2026 to Nov 21. The SNPRM supplements the September 2023 proposal to add the THOR 50th percentile male advanced crash test dummy to Part 572, and seeks comment on a new spine configuration and alternative face foam.
Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Request for Comment; Intelligent Speed Assistance (ISA) User Acceptance and Effectiveness Testing Using Simulator and/or Closed Track Methods
Under the Paperwork Reduction Act, US NHTSA has submitted an information collection request to the White House Office of Management and Budget (OMB) for a study using driving simulator and/or closed-course methods to assess driver acceptance and use of intelligent speed assistance (ISA) systems. The 60-day comment notice published on Jun 25, 2026 received 5 comments; NHTSA made no changes in response, apart from a rounding adjustment that reduced the estimated burden from 311 hours to 308 hours.
Notice of Intent To Establish a Negotiated Rulemaking Advisory Committee for Vehicle Lighting; Request for Comments and Solicitation of Nominations for Membership
The US NHTSA has announced plans to set up a Vehicle Lighting Negotiated Rulemaking Advisory Committee, which will advise the Secretary of Transportation on vehicle lighting safety through negotiated rulemaking. The committee will end once it submits its recommendations or after a maximum two-year term, unless the Secretary renews its charter. The notice invites public comment and nominations for committee members.
Receipt of Petitions for Renewal of Temporary Exemptions From Shoulder Belt Requirement for Side-Facing Seats on Motorcoaches
US NHTSA has received identical petitions from 13 final-stage manufacturers of entertainer coaches seeking renewal of a temporary exemption from the FMVSS No. 208 "Occupant Crash Protection" requirement for shoulder belts on side-facing seats, so they can continue fitting lap-only belts (Type 1) instead of three-point lap/shoulder belts (Type 2). The petitioners state that without the exemption they would be unable to sell vehicles whose overall safety level is no lower than that of compliant vehicles. NHTSA is publishing notice of the petitions and requesting public comment.
NHTSA Safety Research Portfolio Public Meeting: Fall 2026, and Automated Driving Systems Workshop
The US National Highway Traffic Safety Administration (NHTSA) will hold an in-person public safety research meeting from Dec 1 to 2, 2026, featuring topical presentations and results from representatives of the Office of Vehicle Safety Research and the Office of Behavioral Safety Research, along with a technical Q&A session; presentation materials will be made available in the public docket after the meeting. On the afternoon of the first day, the Office of Automation Safety will hold a separate Automated Driving Systems (ADS) workshop, which will not be recorded.
Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Request for Comment; Assessment of Contextual Driver Monitoring Systems (DMS)
Under the Paperwork Reduction Act, the US National Highway Traffic Safety Administration (NHTSA) has submitted an information collection request (ICR) to the White House Office of Management and Budget (OMB). It is seeking approval to evaluate context-based driver monitoring systems (DMS). A 60-day notice inviting public comment was published on Jun 10, 2026, followed by an administrative correction on Jun 18. NHTSA is now inviting public comment on the information collection again.
WTO TBT G/TBT/N/USA/2293/Add.1 (United States of America) — Safety Standard for Lithium-Ion Batteries Used in Micromobility Products and Electrical Systems of Micromobility Products Containing Such Batteries
The US has submitted notification G/TBT/N/USA/2293/Add.1 to the WTO TBT Committee: an addendum on safety standards for lithium-ion batteries used in micromobility products (such as e-bikes and e-scooters) and for electrical systems containing such batteries. The notification covers battery quality, household safety, and related product categories including storage batteries, motorcycles and mopeds (ICS 29.220.20, 43.140).
WTO TBT G/TBT/N/USA/2253/Add.3 (United States of America) — The Safer Affordable Fuel-Efficient (SAFE) Vehicles Rule III for Model Years 2022 to 2031 Passenger Cars and Light Trucks
The US submitted addendum notification G/TBT/N/USA/2253/Add.3 to the WTO TBT Committee on the "Safer Affordable Fuel-Efficient (SAFE) Vehicles Rule III". The rule sets fuel economy requirements for model year 2022–2031 passenger cars and light trucks, including general test conditions and procedures. It bears directly on light-duty vehicle CO2 emissions and fleet efficiency targets.
Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Request for Comment; Consolidated Labeling Requirements for Motor Vehicles (Except the VIN)
NHTSA has submitted an information collection request for existing motor vehicle labeling requirements to OMB, asking to reinstate a previously approved collection with modifications. The notice covers nine FMVSS and applies to vehicle manufacturers and parts suppliers. It does not set a new set of vehicle labeling standards, nor does it mean OMB has approved the request.
Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Request for Comment; Consolidated Labeling Requirements and Procedures for Selecting Lines To Be Covered by the Theft Prevention Standard
NHTSA is seeking comments on the reinstatement of an existing information collection on vehicle theft prevention, covering manufacturers of passenger cars and light trucks subject to the theft prevention standard. This notice does not create a new theft prevention product standard.
Denial of Motor Vehicle Defect Petition, DP26-005
In 2026, the US NHTSA denied petition DP26-005, submitted by petitioner Bowe. The petition asked NHTSA to open a safety defect investigation into inadvertent airbag deployment and SRS data recording errors in 2011–2017 Honda Odyssey vehicles. The Office of Defects Investigation (ODI) carried out a technical review of consumer complaints and database information. It concluded that the issues were unlikely to constitute a motor vehicle safety-related defect and declined to investigate further.
Recalls Next: Technological Innovations and Safety Recalls
The US National Highway Traffic Safety Administration (NHTSA) has announced a public meeting titled "Next-Generation Recalls: Technological Innovation and Safety Recalls" to review trends in vehicle safety recall completion rates and past recall performance, and to explore how automakers can reach affected owners, communicate safety risks effectively and get them to complete recall repairs. Stakeholder input will guide NHTSA's future work. The meeting will be held in person only, with no livestream or recording.
Denial of Motor Vehicle Defect Petition, DP26-003
On Feb 5, 2026, James A. Palmer petitioned NHTSA's Office of Defects Investigation (ODI) under 49 U.S.C. 30162, asking it to open a safety defect investigation into fuel system leaks and engine stalling in the 2006 Nissan Frontier. NHTSA carried out a technical review of the consumer complaints submitted by the petitioner, agency databases and other relevant information. It concluded that the issues do not constitute a motor vehicle safety defect, denied the petition and declined to investigate further.
WTO TBT G/TBT/N/USA/2043/Add.2 (United States of America) — Part 572; Anthropomorphic Test Devices; Test Device for Human Occupant Restraint 50th Percentile Adult Male Dummy (THOR-50M)
The US submitted addendum notification G/TBT/N/USA/2043/Add.2 to the WTO TBT Committee on the THOR-50M (50th percentile adult male dummy) under the anthropomorphic test device provisions of Part 572 of the Code of Federal Regulations. It covers test conditions and procedures for crash protection and occupant restraint systems. The comment deadline for stakeholders is Oct 22, 2026.
Part 572; Anthropomorphic Test Devices; Test Device for Human Occupant Restraint 50th Percentile Adult Male Dummy (THOR-50M)
The US NHTSA has issued a supplemental notice seeking comment on its Sep 2023 proposed rule to add the THOR-50M 50th percentile adult male advanced crash test dummy to Part 572. The notice adds two topics, spine configuration specifications and alternative face foam, and releases further supporting documents.
Ford Motor Company, Receipt of Petition for Decision of Inconsequential Noncompliance
Ford Motor Company filed a noncompliance report with US NHTSA on Sep 11, 2025. On Oct 3, 2025, it petitioned NHTSA to find that the noncompliance of its 2024–2025 Ranger pickups with FMVSS No. 101 (Controls and Displays) is inconsequential to motor vehicle safety. NHTSA has published notice that it received the petition and will decide whether to grant the inconsequentiality determination.
Federal Motor Vehicle Safety Standards; Denial of a Petition for Rulemaking
The US National Highway Traffic Safety Administration (NHTSA) has denied a rulemaking petition submitted by Eric Dauster on Sep 11, 2025, which sought a new standard for a centralized National Map Database (NMD) covering static road information, with compliance required of global map providers and the parties responsible for installing and maintaining road infrastructure (local governments, state transportation agencies, contractors). NHTSA declined to initiate rulemaking, citing a lack of the information needed to act under the National Traffic and Motor Vehicle Safety Act and the appropriate allocation of agency resources.
WTO TBT G/TBT/N/USA/2203/Add.2 (United States of America) — Federal Motor Vehicle Safety Standard No. 213a; Child Restraint Systems--Side Impact Protection; Federal Motor Vehicle Safety Standard No. 213; Child Restraint Systems, Federal Motor Vehicle Safety Standard No. 213b; Child Restraint Systems; Incorporation by Reference
The US has issued notification G/TBT/N/USA/2203/Add.2 to the WTO TBT Committee, covering amendments and updated incorporations by reference for Federal Motor Vehicle Safety Standard FMVSS 213a (child restraint systems, side impact protection), 213 and 213b. Products covered are passenger cars under HS 8703 and child restraint systems (ICS 43.040.80). Manufacturers should watch for changes to side impact test procedures and compliance requirements.
General Motors, LLC, Receipt of Petition for Decision of Inconsequential Noncompliance
General Motors (GM) has determined that certain MY2024 Cadillac XT4, Chevrolet Colorado and GMC Canyon vehicles do not fully comply with US FMVSS No. 108 (lamps, reflective devices and associated equipment). It filed a noncompliance report on Apr 25, 2024 and on May 17, 2024 petitioned NHTSA for a decision that the noncompliance is inconsequential to vehicle safety. NHTSA has now published notice of receipt of the petition.
WTO TBT G/TBT/N/USA/1567/Add.4 (United States of America) — Agency Information Collection Activities; Proposed Information Collection Request; Comment Request; Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards (Renewal)
The US submitted notification G/TBT/N/USA/1567/Add.4 to the WTO TBT Committee, inviting public comment on renewing the information collection request for "Control of Air Pollution from New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards". The recently published notification concerns pollution control measures for heavy-duty engines. Stakeholders may submit comments during the comment period.
WTO TBT G/TBT/N/USA/2320 (United States of America) — Resetting NHTSA's Fuel Economy Program: Commercial Medium- and Heavy-Duty On-Highway Vehicles and Work Trucks
The US has notified the WTO TBT Committee of G/TBT/N/USA/2320, proposing to reset NHTSA's fuel efficiency program for medium- and heavy-duty on-highway commercial vehicles and work trucks. It covers heavy-duty pickups, vans, vocational vehicles, semi-trailer tractors and vehicle engines. The rule is proposed to take effect on Aug 31, 2026.
WTO TBT G/TBT/N/USA/1436/Add.2 (United States of America) — Temporary Exemption From Motor Vehicle Safety and Bumper Standards
The US has submitted addendum G/TBT/N/USA/1436/Add.2 to the WTO TBT Committee, announcing temporary exemptions from motor vehicle safety standards and bumper standards. The product covered is the motor vehicle bumper standard. Comments from interested parties are due by Sep 30, 2026.
WTO TBT G/TBT/N/USA/1667/Add.3 (United States of America) — Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; Request for Comment; Consolidated Child Restraint System Registration for Defect Notifications and Labeling
The US submitted addendum G/TBT/N/USA/1667/Add.3 (product: child restraint systems) to the WTO TBT Committee. It seeks public comment on an agency information collection on 'Consolidated Child Restraint System Registration, Labeling and Defect Notification'. The related forms will be submitted to the White House Office of Management and Budget (OMB) for review and approval. The measure covers defect-notification registration and labelling requirements for child safety seats and falls under recalls and product safety.
WTO TBT G/TBT/N/USA/2318 (United States of America) — New Car Assessment Program (NCAP); Removal of Dynamic Rollover Resistance Test and Side Air Bag Out-of-Position Testing; Updates to NCAP's 10-Year Roadmap
Under WTO TBT notification G/TBT/N/USA/2318, the US proposes to remove the dynamic rollover resistance test and the side airbag out-of-position test from the New Car Assessment Program (NCAP). The proposal also updates the NCAP ten-year roadmap. It covers crash protection and restraint system assessments for passenger cars, light trucks, MPVs and 12-15 seat buses. The comment deadline is Oct 16, 2026.
General Technical, Organizational, Conforming, and Correcting Amendments to the Federal Motor Carrier Safety Regulations
The US Federal Motor Carrier Safety Administration (FMCSA) has made comprehensive technical amendments to the Federal Motor Carrier Safety Regulations (FMCSRs), correcting errors and omissions, removing or updating outdated references, improving clarity and consistency, and making corresponding changes to agency organization and procedural rules. Because the final rule imposes no new substantive requirements or compliance burdens, FMCSA invoked the good-cause exemption under the Administrative Procedure Act (APA) and issued it with immediate effect, without prior notice and public comment.
Amendments and Nonconformance Penalties for Model Year 2027 and Later Heavy-Duty Highway Engines and Amendments to Inducement Provisions for SCR-Equipped Diesel Engines
The US Environmental Protection Agency (EPA) proposes to revise compliance provisions and test procedures for heavy-duty highway engines from model year 2027 onward, including adjustments to regulatory useful life and emissions-related warranty periods, and proposes to make nonconformance penalties available to manufacturers of medium- and heavy-duty engines starting in model year 2027. It also proposes to revise inducement provisions for newly manufactured diesel engines equipped with SCR systems, to support implementation of the heavy-duty emissions program for model year 2027 and later.
Rescinding the Requirement for Electronic Logging Device Operator's Manual Located in Commercial Motor Vehicles
The US Federal Motor Carrier Safety Administration (FMCSA) has amended the Federal Motor Carrier Safety Regulations (FMCSRs) to remove the requirement to keep an electronic logging device (ELD) user manual in commercial vehicles. Because ELDs have been mandatory since Dec 2019, the final rule removes a compliance burden for carriers without affecting safety. Drivers must still know how to operate the ELD and cooperate with enforcement inspections.
Completed Inspection Report Disposition
The US Federal Motor Carrier Safety Administration (FMCSA) has amended its regulations so that motor carriers and intermodal equipment providers no longer have to sign completed roadside inspection reports and return them to the issuing state agency. Reports now only need to be returned to states that request them, removing an unnecessary administrative burden. The change responds to a rulemaking petition from the Commercial Vehicle Safety Alliance (CVSA).
Removal of Self-Reporting Requirement
The US Federal Motor Carrier Safety Administration (FMCSA) has amended its regulations to remove the requirement for commercial driver's license (CDL) holders to report traffic violations to their state of domicile themselves. Self-reporting became unnecessary once the dedicated Electronic Exchange (EEE) of violation information between State Driver Licensing Agencies (SDLAs) took effect in 2024. The change supports the administration's deregulation efforts.
Fees for Commercial Driver's License Information System
The US Federal Motor Carrier Safety Administration (FMCSA) has issued a proposed rule that, under authority granted by Congress in the Commercial Driver's License Information System Modernization Act, would charge State Driver Licensing Agencies (SDLAs) user fees for access to the Commercial Driver's License Information System (CDLIS). The fees would be collected by the American Association of Motor Vehicle Administrators (AAMVA), which operates and maintains CDLIS on behalf of state agencies under an FMCSA mandate. This is a US rather than EU regulation and concerns fee arrangements rather than vehicle type approval, emissions or safety requirements, so it cannot be assigned to a more specific category.
Revision of Tier 4 Criteria Pollutant Standards, Part 1: Amendments to Phase-In Schedule for Light-Duty and Medium-Duty Vehicles
The US Environmental Protection Agency (EPA) is reconsidering the Tier 4 multi-pollutant emission standards for new light-duty and medium-duty vehicles for model year 2027 and later. In a first-phase rulemaking it proposes to change the phase-in schedule: Tier 3 standards for certain vehicles would be extended to model years 2027 and 2028, with the Tier 4 phase-in correspondingly postponed to begin in model year 2029; it also proposes adjustments to certification emission test procedures. Further revisions to the Tier 4 standards themselves will be proposed separately in a subsequent second-phase rulemaking.
Rescission of the Greenhouse Gas Endangerment Finding and Motor Vehicle Greenhouse Gas Emission Standards Under the Clean Air Act
The US Environmental Protection Agency (EPA) has announced that it is rescinding the greenhouse gas endangerment and cause-or-contribute findings made in 2009 and repealing all greenhouse gas emission standards for light-, medium- and heavy-duty vehicles and engines. The EPA concluded that Section 202(a)(1) of the Clean Air Act does not authorize it to set emission standards to address global climate change. Citing the major questions doctrine, it also argued that it lacks the statutory authority to regulate, and is therefore no longer retaining these emission requirements.
Reconsideration of 2009 Endangerment Finding and Greenhouse Gas Vehicle Standards; Extension of Comment Period
The US Environmental Protection Agency (EPA) has extended the comment period for its proposed rule "Reconsideration of the 2009 Endangerment Finding and Greenhouse Gas Vehicle Standards", published on Aug 1, 2025. The extension gives stakeholders more time to comment on the review of greenhouse gas vehicle standards.
Reconsideration of 2009 Endangerment Finding and Greenhouse Gas Vehicle Standards
The US Environmental Protection Agency (EPA) has issued a proposed rule to repeal all greenhouse gas emission standards for light-, medium- and heavy-duty vehicles and engines and to rescind the 2009 endangerment finding. The EPA argues that Section 202(a) of the Clean Air Act does not authorize it to set emission standards to address global climate change, and that existing emission-reduction technologies could do more harm to public health and welfare.
Public Hearing for Reconsideration of 2009 Endangerment Finding and Greenhouse Gas Vehicle Standards
The US Environmental Protection Agency (EPA) signed a proposal on Jul 29, 2025 to rescind the 2009 greenhouse gas Endangerment Finding and repeal all greenhouse gas emission standards for light-, medium- and heavy-duty vehicles and engines. A virtual public hearing on the proposal is scheduled from Aug 19, 2025 to 20. If too many people register to testify, an additional session will be held on Aug 21.
Greenhouse Gas Emissions Standards for Heavy-Duty Vehicles-Phase 3; Correction
The US Environmental Protection Agency (EPA) has issued a correction making technical fixes to the final rule on Phase 3 greenhouse gas emission standards for heavy-duty highway vehicles, published in the Federal Register on Apr 22, 2024 and effective Jun 21, 2024. The correction only fixes unintentional errors introduced while the amendatory text was being prepared and published, and makes no substantive changes.
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles; Correction
The US Environmental Protection Agency (EPA) has issued a correction to the final rule published on Apr 18, 2024 and effective Jun 17, 2024, which set new multi-pollutant emission standards for light-duty and medium-duty vehicles for model year 2027 and later. The correction only fixes unintentional errors made when the regulatory text was published, and makes no substantive changes.
Greenhouse Gas Emissions Standards for Heavy-Duty Vehicles-Phase 3
The US Environmental Protection Agency (EPA) has set new greenhouse gas emission standards for heavy-duty highway vehicles from model year 2032 onward, phased in for some vehicle categories as early as model year 2027. The rule also revises flexibilities under the averaging, banking and trading (ABT) program, adds warranty requirements for components such as zero-emission vehicle batteries, and requires plug-in hybrid and battery-electric vehicles to be fitted with a customer-facing battery state-of-health monitor.
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
Under the Clean Air Act, the US Environmental Protection Agency (EPA) is setting stricter criteria pollutant and greenhouse gas emission standards for light-duty vehicles and Class 2b/3 medium-duty vehicles, to be phased in over model years 2027 to 2032. It is also revising related provisions, including compliance accounting for zero-emission vehicles and plug-in hybrids, and battery durability and warranty requirements.
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
Under the Clean Air Act, the US Environmental Protection Agency (EPA) has proposed stricter criteria pollutant and greenhouse gas emission standards for light-duty vehicles and Class 2b/3 medium-duty vehicles, phased in over model years 2027 to 2032. The proposal also covers upstream emissions accounting for zero-emission vehicles, battery durability and warranty requirements, refueling emission controls and several changes to compliance procedures.
Public Hearing for Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
The US Environmental Protection Agency (EPA) is holding a two-day virtual public hearing on May 9–10, 2023, with an additional day on May 11 if needed. The hearing covers a multi-pollutant emissions standards proposal signed by Administrator Regan on Apr 11, 2023. The proposal would set stricter greenhouse gas and criteria pollutant limits for model year 2027–2032 light-duty vehicles and Class 2b/3 medium-duty vehicles. It would also add refuelling emission controls for incomplete medium-duty vehicles, as well as battery durability and warranty requirements for plug-in vehicles.
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
The US Environmental Protection Agency (EPA) has issued a final rule setting stricter nationwide emission standards for NOx, PM, HC, CO and air toxics from heavy-duty engines and vehicles, covering a broader range of heavy-duty engine operating conditions. The rule also revises test procedures, regulatory useful life and emission-related warranty provisions, taking effect from model year 2027. It also makes minor related amendments to regulations for light-duty vehicles, marine diesel engines, locomotives and other nonroad engines.
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards; Extension of Comment Period
The US Environmental Protection Agency (EPA), which published the proposed rule "Control of Air Pollution from New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards" on Mar 28, 2022, has extended the public comment period on the proposal. The extension gives stakeholders more time to comment on emission standards for heavy-duty vehicle engines.
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
The US Environmental Protection Agency (EPA) is proposing a rule that would comprehensively revise its emission control program for on-highway heavy-duty vehicles and engines, including emission standards, test procedures, useful life and warranty requirements, to further reduce NOx, particulate matter, ozone and greenhouse gas emissions. It is also proposing targeted revisions to the Heavy-Duty Greenhouse Gas Phase 2 program, including further reductions in model year 2027, while taking into account the shift toward zero-emission technologies in certain segments of the heavy-duty sector.
Overseas car markets, regulatory changes and competitor moves. New content is pushed on WeChat when published, with source links.
WeChat official account
Chexun Zongheng RZ
Search for "Chexun Zongheng RZ" on WeChat and follow us
On a computer, scan the code with WeChat; if you opened this page in WeChat, long-press the code to scan it.
Work WeChat
AutoMusic
Add WeChat ID Frontline_vehicle
On a computer, scan the code with WeChat; if you opened this page in WeChat, long-press the code to scan it.
Also available via RSS: ArticlesWeek in review