In 2025 the share of chargeable trucks in the EU rose to 4.2%. Six in ten were medium trucks of 3.5 to 16 tonnes. Above 16 tonnes, the heavy-truck segment Scania focuses on, the share was only 2.0%. After a €70 million upgrade, the Angers plant assembles diesel and electric trucks on the same line, and its line capacity is sized to the level of the heavy-truck segment.
Filling a dedicated electric heavy-truck line requires double-digit penetration. Plug-in heavy-truck registrations grew 51.1% in 2025; even at that pace year after year, share would only pass 10% around 2029 (starting from 2.0%). Angers is expanding an existing plant and converting it to mixed-line production, not building a dedicated line. Conversely, if heavy-truck share keeps growing at 50% or more in 2026 and regulations are not relaxed, the capacity limit of the shared line will be exposed first.
After a retrofit, the plant, which has run for more than 30 years, assembles combustion and electric trucks on the same line and switches the line according to the order mix.
They support the EPA's repeal of the 2009 greenhouse gas endangerment finding and all vehicle climate standards. With three heavy truck groups signing jointly, slowing the pace is a shared position.
EU heavy truck CO2 standards require average new-fleet emissions in 2030 to be 45% below 2019. Scania keeps investing in electric capacity but wants the pace set by customers' total cost of ownership rather than regulatory deadlines.
Converting a shared line shows management expects electric heavy-truck orders over the next few years will not fill a dedicated line; orders for battery packs, e-axles and high-voltage harnesses will be released month by month in step with end sales. To spot the ramp-up point, watching the electric-to-diesel production ratio at Angers gives an earlier signal than trade-show statements.
CEO Levin set out three prerequisites: operator investment confidence, large-scale infrastructure rollout and a predictable regulatory framework. Orders placed before all three are in place are demonstration projects; only those placed after are fleet renewals. Building pilot experience on closed routes keeps switching costs lowest when the loop closes.
Europe's leading manufacturers have collectively chosen to move slowly (the joint motion by Traton, Daimler Truck and Volvo Group is evidence of their stance). This makes ports, sanitation and mining sites a side entry point. These applications run fixed routes and return to base to charge, so TCO is easiest to break even, and they place the lowest demands on regulatory certification and service networks.