↑Back to top
EU · Heavy-duty vehicle emissions regulation · Commercial vehicles ACEA letter to MEPs 2026-10-20 · Welt am Sonntag interview

Two emissions rules for European heavy trucks: Euro 7 requirements delayed two years, CO₂ targets linked to charging points

On Oct 20, the European Automobile Manufacturers' Association (ACEA) wrote to Members of the European Parliament asking for a five-year delay to the Euro 7 brake emission requirements for heavy-duty vehicles and a two-year delay to the current entry-into-force dates. In an interview with Welt am Sonntag, Achim Puchert, Daimler Truck board member and head of Mercedes-Benz Trucks, argued that CO₂ requirements for heavy trucks should be tied to the actual build-out of charging infrastructure. Neither demand changes the limits; both change the deadlines. The Euro 7 amendment is still being negotiated within the Council, and the review of the CO₂ regulation is due by the end of 2027.

ACEA letter to MEPs · 2026-10-20 WELT · 2026-10-28 ACEA press release · 2026-09-14 / 10-28 EUR-Lex:2024/1257、2024/1610、2023/1804 Council of the EU · 2026-03-30 ICCT · 2026-06
Call to postpone Euro 7 effective dates
Year 0
Postponed from 2028-05-29 for new types and 2029-05-29 for all new vehicles
Call to postpone brake emission requirements
Year 0
Brake particle test cycle for heavy-duty vehicles not yet finalised
Zero-emission share of new heavy truck registrations in Europe
0%
ACEA basis, 2026-09-14
Heavy-truck CO₂ regulation review deadline
End of 0
2024/1610 Article 15: progress on charging infrastructure must be assessed
01 / Effective date

Heavy-duty Euro 7: currently takes effect 2028-05-29 / 2029-05-29; ACEA wants each pushed back two years

Article 21 of Regulation (EU) 2024/1257 provides that Euro 7 applies to new types of M2, M3, N2 and N3 vehicles and O3 and O4 trailers from May 29, 2028, and to all new vehicles from May 29, 2029. Brake particle limits for heavy-duty vehicles will be set later by the Commission through a delegated act, with testing under UN Global Technical Regulation No. 24. ACEA said in its letter that the test procedures in the implementing act, and the method for deriving whole-vehicle compliance values from component measurements, have not yet been finalized or adequately validated.

Three timelines for heavy-duty Euro 7: current, Presidency compromise text delaying by 18 months, ACEA delaying by 24 months
Left dot = date applicable to new types; right dot = date applicable to all new vehicles · Years converted by month
Sources: EUR-Lex 2024/1257 Article 21; ICCT 2026-06 (citing Council ST 6612/2026); ACEA letter to MEPs 2026-10-20. ACEA proposal dates derived by adding two years to current dates
▸ The Presidency's proposal and ACEA's proposal are only 6 months apart. Negotiations are no longer about whether to delay but for how long. Both proposals keep a one-year buffer between new types and all new vehicles.
EU heavy-duty emission standard milestones: Euro VI fully in force 2013-12-31; Euro 7 currently in force 2029-05-29
2012-12-31
Euro VI type-approval threshold for new models
Regulation 595/2009: non-compliant new models will no longer receive type approval.
2013-12-31
Euro VI for all new vehicles
Non-compliant new vehicles may not be registered, sold or put into service.
2024-04-24
Euro 7 regulation adopted 2024/1257
For the first time, light and heavy vehicles are covered by the same regulation, with brake and tyre emissions added.
2028-05-29
Current: Euro 7 applies to new heavy-duty vehicle types
ACEA proposal extended to 2030-05-29.
2029-05-29
Current: Euro 7 applies to all newly registered heavy-duty vehicles
ACEA proposal pushed back to 2031-05-29, about 17 years and 5 months after Euro VI took full effect.
2026-10-20
ACEA writes to MEPs
Brake emissions delayed by five years; overall entry into force pushed back by two years.
Source: EUR-Lex 595/2009, 2024/1257; ACEA letter to MEPs 2026-10-20. Interval calculated from 2013-12-31 to 2031-05-29
▸ Emission standard transitions for heavy vehicles are slow anyway; under ACEA's proposal, more than 17 years would separate full application of Euro VI and Euro 7.
4 outstanding work items on heavy-duty brake emissions listed in ACEA's letter of 2026-10-20
ACEA letter to MEPs, 2026-10-20
Work itemsCurrent situation described in the letterStatus
Component test procedureTest procedure for heavy-duty vehicle brake components under the UN GRPE PMP mandate still to be finalised and validatedNot finalised
Whole-vehicle compliance conversionNo method yet exists for converting component test-bench results into representative whole-vehicle resultsNot established
Cross-category validationThe method needs to be validated across vehicle categories, configurations, operating conditions and braking systemsIncomplete
Limits and implementation timelineOnly once limits and implementation arrangements are finalised can OEMs and suppliers develop, validate and mass-produce compliant solutionsTo follow
Source: ACEA letter to MEPs, 2026-10-20; empowerment for limit values: EUR-Lex 2024/1257
▸ The four work streams run in sequence: the next cannot start until the previous one is finalised. ACEA sees five years as the time needed to complete the chain.
ICCT: a 18-month delay to Euro 7 for heavy-duty vehicles means 9.9 kt of extra NOx in 2030 and 13.1 kt in 2040
kt/year · EU-27 heavy-duty vehicles · Relative to current effective dates · About 230 kt cumulative over 2025–2050
Source: ICCT, "ICCT comments on the proposed postponement of Euro 7 emissions standards for heavy-duty vehicles", 2026-06
▸ ICCT's estimate covers only the 18-month option. Heavy-duty vehicles in the EU stay in service for about 20 years on average, so Euro VI vehicles registered during the delay will run into the 2040s, and the annual increase grows year after year.
02 / CO₂ targets

Heavy trucks above 16 tonnes must cut emissions by 43% in 2030 versus 2019; zero-emission share of new heavy truck registrations in Europe: 2.4%

"We are not questioning the targets. We did our homework and invested in vehicles. But infrastructure is developing far more slowly than announced," Puchert told Welt am Sonntag. He called for regulatory requirements to be tied more closely to the actual build-out of infrastructure. At the IAA in Hanover on Sep 14, the CEOs of seven manufacturers, including Daimler Truck, jointly called for the 2030 CO₂ compliance deadline to be pushed back by three years.

Two Mercedes-Benz eActros 600 battery-electric heavy trucks in 2024 European test tour livery
Two Mercedes-Benz eActros 600 battery-electric tractors in 2024 European Testing Tour (2024) livery. Image: Daimler Truck (newsroom, from the press release on the eActros 600 being named International Truck of the Year 2025)
CO₂ reduction targets for 4x2/6x4 heavy trucks over 16 tonnes: 15% in 2025, 43% in 2030, 64% in 2035, 90% in 2040
% · vs. 2019 reporting period baseline · Regulation (EU) 2024/1610 Annex I
Source: EUR-Lex 2024/1610 Article 3a and Annex I; ACEA press release 2026-09-14 (-43%/-64%/-90%)
▸ The target jumps from 15% in 2025 to 43% in 2030, the biggest step of any stage, and it is exactly this milestone that seven manufacturers want postponed.
Zero-emission share of new heavy truck registrations in Europe: Europe-wide 2.4%, Germany 4.3%, France 2.4%
% · ACEA basis as of 2026-09-14 · Poland, Spain and Italy "well below 1%", no specific figures given
Source: ACEA press release, 2026-09-14
▸ Even Germany, with the highest share, is only at 4.3%, while in the fastest-growing registration markets such as Poland and Spain zero-emission trucks are below 1%. The bigger the market, the further it has to catch up.
Europe has fewer than 2,000 truck-suitable public chargers; at 700 per month over 45 months, about 31,500 more are needed
Count · existing uses ACEA's "fewer than 2000" upper bound · additional demand converted as 700×45
Source: ACEA press release, 2026-09-14 (fewer than 2000, at least 700 per month, 45 months to 2030); 31500 calculated on this page
▸ The number needed is more than 15 times the current stock, and beyond construction there is grid connection: ACEA says connecting new stations could take years.
Joint IAA press conference, 2026-09-14: CEOs of seven manufacturers call for the 2030 CO₂ compliance deadline to be pushed back three years
CEOs in attendance per ACEA press release
CompanyAttendees
DAF TrucksJim Walenczak
Daimler TruckKarin Rådström (also chair of ACEA's Commercial Vehicle Board)
Ford OtosanGüven Özyurt
Iveco GroupOlof Persson
MAN Truck & BusAlexander Vlaskamp
Scania / TRATONChristian Levin
Volvo GroupMartin Lundstedt
Source: ACEA press release, 2026-09-14
▸ The letter to MEPs in 10 was also signed by Rådström, with Daimler Truck at the forefront of both industry appeals; Puchert's linkage argument is in line with the joint appeal.
Fines and market data for heavy truck CO₂ compliance Regulation 2024/1610 and ACEA data for months 9–10, 2026
Excess emissions penalties
4250 EUR
Per g CO₂/tkm, 2024/1610 Article 8
3 percentage-point gap in 2030
2.2 billion euros
ACEA estimate of fines
Gap to 2030 target
45 months
ACEA basis, 2026-09-14
EU truck registrations, months 1–9 2026
245079 units
Medium + heavy trucks, +7.5% YoY
Plug-in truck share
5.3%
BEV + PHEV, excluding fuel cell; +49.8% YoY
Diesel truck share
91.7%
1–9 2026
Sources: EUR-Lex 2024/1610; ACEA press releases of 2026-09-14 and 2026-10-28. Data for months 1–9 cover EU medium and heavy trucks combined, a different basis from the "European heavy-truck zero-emission share of 2.4%", so the two are not compared.
03 / review

Heavy-truck CO₂ regulation review due by 2027-12-31; on the same date, AFIR requires 50% of the TEN-T network to be covered by heavy-truck charging stations

Article 15 of Regulation 2024/1610 requires the Commission to complete a review by Dec 31, 2027, including a specific assessment of zero-emission heavy truck registrations in each member state and the rollout of public and private charging and refuelling infrastructure for heavy trucks. The targeted amendment adopted by the Council on Mar 30, 2026 changes the 2025–2029 CO₂ credit calculation to measure against each manufacturer's own annual target, citing among other reasons the slow rollout of public charging along motorways. The long-term reduction targets and penalties are unchanged.

EU vehicle CO₂ regulation changes and heavy truck review milestones: 2025-06 to 2027-12
2025-06-17
Passenger cars and LCVs: 2025/1214
CO₂ compliance assessed on a three-year average for 2025–2027; targets unchanged.
2025-12-16
Commission unveils automotive package
Includes the targeted heavy truck CO₂ amendment and the automotive omnibus simplification package (Omnibus IX).
2026-03-30
Council adopts targeted amendment to heavy-truck CO₂ rules
For 2025–2029, carbon credits are calculated against each manufacturer's own annual targets; applies to heavy trucks over 16 t and some buses over 7.5 t.
2026-09-14
Joint call by seven manufacturers' CEOs
2030 compliance deadline pushed back by three years.
2027-06-30
Report on zero-emission demand from large fleets
2024/1610 Article 3c: analyse measures to increase the share of zero-emission heavy trucks in large fleets.
2027-12-31
CO₂ regulation review · AFIR interim milestone
The review must assess progress on heavy-truck charging infrastructure; AFIR requires heavy-truck charging stations covering 50% of TEN-T network length.
Source: EUR-Lex 2025/1214, 2024/1610; Council of the EU press release 2026-03-30; ACEA press release 2026-09-14; EUR-Lex 2023/1804
▸ The review and the AFIR interim milestone fall due on the same day, so the number of charging stations built will feed directly into the review report's assessment.
AFIR public charging coverage for heavy trucks: 15% of the TEN-T network by end-2025, 50% by end-2027
% of TEN-T network length (both directions) · from end-2030: one site every 60 km on the core network and every 100 km on the comprehensive network
Source: EUR-Lex 2023/1804, Article 4
▸ From 2025 to 2027, the coverage requirement rises from 15% to 50%, and the per-site power requirement rises from 1400 kW to 2800 kW on the core network.
EU vehicle emissions and CO₂ rule changes: 2 adopted, 4 under negotiation or proposed
Organized by target, method and status
AdjustmentScope and methodStatus
2025/1214Passenger car and LCV CO₂: three-year average compliance for 2025–2027Implemented
Targeted revision of heavy-truck CO₂ rulesCarbon credit calculation eased for 2025–2029; targets and penalties unchangedImplemented
Presidency compromise textEuro 7 for heavy-duty vehicles delayed by 18 months overallUnder negotiation in Council
ACEA letter to MEPsEuro 7 for heavy-duty vehicles delayed by two years, brake emissions by five yearsIndustry demands
CEOs of seven manufacturers2030 heavy-truck CO₂ compliance deadline pushed back three yearsIndustry demands
Puchert interviewLinking heavy truck CO₂ requirements to actual charging infrastructure build-outCompany statements
Source: EUR-Lex 2025/1214; Council of the EU 2026-03-30; ICCT 2026-06; ACEA 2026-09-14, 2026-10-20; WELT 2026-10-28
▸ Both measures already adopted keep the targets unchanged but change the calculation method, which is exactly what the industry is now asking for.
Conditions for zero-emission heavy trucks listed by ACEA on 2026-09-14, grouped by responsible party: 1 for manufacturers, 4 for parties other than manufacturers
ACEA press release 2026-09-14 · responsible-party grouping by AutoMusic
Source: ACEA press release, 2026-09-14 (charging and hydrogen refuelling infrastructure, grid connection, CO₂-based road charges, energy and carbon prices, supply of zero-emission models)
▸ OEMs base their demand for linkage on the fact that most of these conditions are outside their control. ACEA says CO₂-based road charging is actually in force in only four member states, and ETS2 has been postponed to 2028.