↑Back to top
ACEA · VECTO Bus & Coach Analysis · Jun 2026

First measured data on European bus CO2: city buses zero-emission 45%, coaches 0%

For the first time, five European OEMs have reported fleet-level CO2 data under the statutory VECTO methodology for all heavy buses they produced in Q2 and Q3 2024. City buses and coaches belong to two different eras, yet the clock is already running on both compliance tests: the coach baseline period is locked in at 2025, while the first series-production battery-electric intercity coach will not be delivered until the second half of 2026.

SOURCE: ACEA & SIOUX TECHNOLOGIES · COVERAGE ≈ 80% OF EU BUS & COACH MARKET · GROUPS 31-LF…34-C3
Zero-emission share of city buses (31-LF group)
45%
Quota of 90% required in 2030, 100% in 2035
Zero-emission share of long-distance coaches (four high-floor groups)
0%
First series-production battery-electric intercity coach to be delivered in H2 2026
Intercity/long-distance 2030 emissions reduction target
-43%
Baseline is the 2025 reporting period, not 2019 as for trucks
Per-passenger CO2 emissions range for buses
16–32 g/pkm
The seven groups average 15.4–24.3 g/pkm
01 · Gap

Zero-emission share: same industry, two eras

7 of 16 standard groups meet the confidentiality threshold of "at least four OEMs submitting", covering more than 90% of submitted vehicles. The zero-emission share drops steeply along the urban–regional–long-haul axis.

Zero-emission share by vehicle group (2024 Q2/Q3, production basis)

Unit: % · MZE = zero-emission quota group · MCO2 = emission reduction rate group
There is a cliff between city buses (MZE) and the other groups (MCO2). The 45% of 31-LF and the 0% of the four high-floor groups fall under two mechanisms in the same regulation: the former requires a 90% quota by 2030, the latter a 43% emissions cut against the 2025 baseline by 2030.

Group composition of the analysis sample

Share of analysed vehicles by group (%) · high-floor models total 60%
City buses, the most discussed segment, account for only 32%. The largest single group is 2-axle high-floor intercity coaches 32-C2 (31%); most emissions come from intercity and long-distance segments.

Statutory annual mileage: long-haul group drives 60% more

Annual mileage (km) and average occupancy (persons) set by EU 2024/1610
The trucks that drive the most face the weakest rules. The long-haul group's statutory annual mileage is 96000 km, versus 60000 km for the urban/regional groups. Mileage weighting magnifies the mismatch: the most loosely regulated segment emits the most.
02 · Scale

g/pkm: an emissions map on a per-passenger basis

VECTO measures bus emissions in grams of CO2 per passenger-km, so passenger capacity is the denominator, and zero-emission vehicles count as 0 in the fleet average. These two calculation details determine how the figures should be read.

Group-average CO2 and the distribution range of individual diesel vehicles

Bars = per-vehicle range (g/pkm) · Dots = group average · Zero-emission vehicles counted at 0 g/pkm in the average
The 31-LF group average is 15.4, yet individual diesel trucks range from 22 to 32. A 45% share of zero-emission vehicles pulls the group average down by a third. Apply the same arithmetic to the 2025 base year and you get a perverse incentive: "selling zero-emission vehicles early = lowering your own baseline".

Passenger load is the top variable in g/pkm

X-axis = group average occupancy (passengers) · Y-axis = group average CO2 (g/pkm) · bubble = group share
A 74-passenger articulated bus emits less per passenger than a 32-passenger coach. 17.3 vs 19.7 g/pkm: for buses, emissions cuts depend first on occupancy, and only second on vehicle weight and powertrain.

Timelines for the two tests

MZE = zero-emission quota for city buses · MCO2 = reduction rate for intercity/long-distance (baseline 2025)
2030 is the first deadline for two exams. City buses face a 90% zero-emission quota; intercity/long-distance coaches must cut emissions by 43%, and improvements made in 2019–2025 do not count.
ANALYSIS · Working backwards

What zero-emission share does -43% require?

Assuming diesel vehicle efficiency in 2030 improves 8% on the baseline, and the fleet average must fall to 57% of the baseline, the zero-emission share needs to reach 1−0.57/0.92 ≈ 38%; with no efficiency improvement, it would need 43%; even with a 12% improvement, it would still need 35%. In every scenario, more than one in three new intercity/long-distance coaches in Europe must be zero-emission by 2030, from a starting point of 0%, with the first series-production vehicle only delivered in 2026.

Mileage × passenger weighting: who has the biggest impact on hitting targets

MPW weighting factor (passengers/tonne, normalized to truck group 5-LH) · The higher the weighting, the greater the impact on overall compliance
Articulated city buses carry the highest weighting at 2.8; low-entry intercity 31-L2 has the lowest at just 1.6. Compliance resources should go first to the high-weight groups: 35-FE, 32-C2 (2.3) and 34-C3 (2.1). The zero-emission starting point for the last two groups is 0%.
05 · Scenarios

Scenario analysis: how far from 0% to the compliance line

Converting the -43% reduction rate into a zero-emission share and plugging in the baseline-period method, the two curves show how hard the long-haul test really is (see chart notes for methodology; all projections are illustrative).

Required zero-emission share vs diesel efficiency improvement (2030)

Scenario calculation: fleet average = baseline × 57% · x-axis shows per-vehicle diesel efficiency improvement vs baseline
Efficiency gains won't pass the test. Raising diesel improvement from 0% to 12% only cuts the required zero-emission share from 43% to 35%; the main gap has to be closed by switching products.

The cost of acting early in the baseline period (sensitivity)

Scenario calculation: each +1 pp of zero-emission share in the 2025 base period lowers the baseline average by 1% (assuming 8% diesel efficiency improvement)
For every 1 percentage points of early overperformance in the baseline period, roughly 0.6 more points must be paid back in 2030. The mechanism penalises early movers, which explains why volume deliveries are timed for after the baseline period ends in Jul 2026.
06 · Outlook

Three things to watch over the next 6-12 months

WATCH 01

Gap between official and simulated data

The European Environment Agency will publish its first official baseline data from 2026, counted by registration date; this ACEA analysis is based on production date. The gap between the two methodologies will reveal the real impact of the multi-stage manufacturing gap and the 20% sample blind spot.

Signal: if deviation >5%, pre-run data loses much of its value in negotiations
WATCH 02

eIntouro order structure

Once deliveries begin in the second half of 2026, the buyer mix will be the litmus test: if subsidised pilot projects dominate, intercity electrification remains a policy showpiece; bulk orders from private route operators would mark the commercial starting point. How quickly the 2% zero-emission share in the 31-L2 group reaches double digits will be the first quantitative evidence.

Signals: share of private orders and change in ZEV share for 31-L2 categories
WATCH 03

Where regulatory rigidity is heading

At the end of Mar 2026, the EU adopted a compliance flexibility package for heavy-duty vehicles, bringing regulatory rigidity into negotiable territory. Whether the 2030 target of -43% for long-distance coaches is applied unchanged will decide whether this transition is a six-year sprint or a ten-year marathon. The "per-capita emissions are already very low" framing in the ACEA report is designed precisely for this negotiation.

Signal: changes in the wording of the MCO2 clause in the next target review
03 · Blind spots

Beyond the sample: the fastest-growing players aren't in the table

ACEA data covers about 80% of the European market, but registration data tells a different story for the electric bus market: the market share leader does not appear in this dataset at all.

European electric bus registrations double in two years

Registrations (units) · zero-emission share of new EU city buses in 2025: 60%
11607 registrations in 2025, up 48% year on year. The 45% zero-emission share in the ACEA sample is a mid-2024 snapshot; on a registration basis it had already reached 60% in 2025 — in this market, the gap between data bases amounts to a year of growth.

2025 brand shares: Yutong leads

European electric bus registration share (%) · grey = non-ACEA members
Yutong leads with 15.5%; Chinese brands total about 28%. MAN surged to 12.1% on growth of +224% — domestic OEMs can catch up on volume, but every unit is benchmarked against Chinese brands' cost curve.

One market, two measures

Zero-emission share of city buses: ACEA production basis (mid-2024) vs EU registration basis (2025)
Between 45% and 60% lie a year of growth and a 20% sample blind spot. Relying only on ACEA figures systematically underestimates how fast European city buses are electrifying, since the fastest growth happens precisely outside the sample.

Powertrain mix of zero-emission buses (2025 registrations)

BEV vs hydrogen fuel cell · 558 fuel cell buses, nearly half supplied by Solaris
BEVs account for 95%, hydrogen fuel cells about 5%. The technology battle for city buses has settled; hydrogen is a supplementary option for buses, and its main arena has shifted to future options for long-haul.
04 · Structure

Multi-stage manufacturing: data for a third of coaches is still missing

Buses are built in two stages by chassis makers and bodybuilders, so VECTO splits declaration into two steps: primary (powered chassis) and complete (whole vehicle). Emissions responsibility lies with the primary manufacturer, yet the final declared value is determined by the body.

Primary vehicle share by group: the long-haul group has the largest gap

Share of vehicles with "primary data only" (%) — bodywork still in the hands of downstream bodybuilders
36% of vehicles in group 32-C3 and 28% in group 34-C3 have chassis data only. The separation of responsibility and control means OEMs will impose weight limits and declaration interfaces on bodybuilders, and compliance capability will become a survival threshold for small body shops.
ANALYSIS · Sensitivity

Sell 5% more zero-emission vehicles in the base year, and 2030 requires another 3 percentage points

If the intercity zero-emission share in the 2025 baseline period rises from 0% to 5%, the baseline average falls by 5% accordingly, and the 2030 target line becomes 57% × 0.95 ≈ 54.2% of the baseline. Under the same scenario of 8% diesel efficiency improvement, the required zero-emission share rises from 38% to 1−0.542/0.92 ≈ 41%. For every 1 percentage points gained early in the baseline period, roughly 0.6 extra percentage points are owed in 2030: the mechanism itself penalises first movers.

Full data tables for all seven groups

ACEA report Table 1 / Table 3 combined · MZE = zero-emission quota · MCO2 = emission reduction rate target (baseline 2025)
Model groupPerformance assessmentSample shareZero-emission sharePrimary data onlyStatutory annual mileageAverage occupancyMPW weightingPool avg. CO2
31-LF city low-floor MZEQuota 90%/100%20%45%2%60000 km46 people1.715.4 g/pkm
35-FE urban articulated MZEQuota 90%/100%11%22%3%60000 km74 people2.817.3 g/pkm
31-L2 intercity low-entry MCO2-43/-64/-90%8%2%3%60000 km42 people1.624.3 g/pkm
33-L2 low-entry 3-axle MCO2-43/-64/-90%1%0%13%60000 km52 people2.022.2 g/pkm
32-C2 intercity high-floor MCO2-43/-64/-90%31%0%1%96000 km38 people2.322.0 g/pkm
32-C3 long-haul 2-axle MCO2-43/-64/-90%20%0%36%96000 km32 people1.919.7 g/pkm
34-C3 long-haul 3-axle MCO2-43/-64/-90%9%0%28%96000 km36 people2.118.4 g/pkm

Trucks vs buses: same targets, different starting lines

Emission reduction targets for heavy trucks vs. intercity/long-distance coaches (MCO2) · The difference lies in the baseline period
Nearly identical targets, base periods six years apart. Trucks use 2019 as the base year and already passed the -15% test in 2025; buses count from 2025, so industry progress made in 2019-2025 does not count for buses.

First series-production battery-electric intercity bus: eIntouro

ManufacturerDaimler Buses (Mercedes-Benz)
World premiereOct 2025 Busworld Europe (Brussels)
Order intakeFrom spring 2025
Series deliveriesH2 2026
Battery / rangeLithium iron phosphate (LFP) · up to 500 km
Length / seats12.18m / 13.09m · 50–63 seats
Electrification project portfolio8 European countries (incl. Lüneburg turnkey EV yard)

Key report parameters at a glance

Data providerDaimler Buses / MAN / IVECO Bus / Volvo Buses / Scania
Analysis performed bySioux Technologies B.V. (neutral third party)
Data windowQ2 and Q3 2024 output
Market coverageApprox. 80% (ACEA member basis)
Analyzable group / standard group7 / 16 (covering >90% of submitted vehicles)
Confidentiality thresholdPublished only when ≥4 OEMs per group have submitted data
VECTO bus reporting takes effectJan 1, 2024 (M3 >7.5 t)
Official baseline dataEuropean Environment Agency · no earlier than 2026 (registration basis)
City bus quota (MZE)90% in 2030 → 100% in 2035
Intercity/coach target (MCO2)-43% / -64% / -90% (2030/35/40, baseline 2025)

Regulatory clock vs industry clock

Jan 2024
Heavy buses brought under mandatory VECTO CO2 reporting; every new vehicle registration must include a g/pkm value
Q2–Q3 2024
ACEA production data window for five OEMs — the data period for this report; zero-emission city buses 45%/22%, long-distance 0%
Jul 2025-Jun 2026
Intercity/long-distance baseline reporting period: the fleet average for the period becomes the denominator for the 2030/2035/2040 targets, and zero-emission vehicles count as 0
H1 2026
ACEA releases this preview report; EU adopts heavy-duty vehicle compliance flexibility package; European Environment Agency's first official data still pending
H2 2026
Mercedes-Benz eIntouro enters series production and delivery – Europe's first series-built battery-electric intercity bus (LFP, up to 500 km)
2030
90% zero-emission quota for city buses takes effect; intercity/long-distance coaches must cut emissions 43% vs the 2025 baseline
2035 / 2040 years
City buses: 100% quota; intercity/long-distance: -64% / -90% — compliance headroom for diesel coaches drops to zero

Definitions and methodology (read before using the figures)

Calculation toolVECTO (Vehicle Energy Consumption Calculation Tool, EU 2017/2400)
Bus metric unitg CO2 / passenger-km (g/pkm); trucks in g/tkm
Two-step reportingStep 1 primary (powered chassis + virtual body) → Step 2 complete (physical vehicle)
Zero-emission classification (ZEV)No combustion engine, or VECTO value <3 g/tkm / <1 g/pkm
ZEV accounting methodCounted in the group average at 0 g/pkm (pulls the average down)
Meaning of group averageWeighted results across mission profiles (heavy urban/urban/suburban/regional/long-haul)
Known limitations 1Only two quarters of output; full-year seasonal effects not included
Known limitations 2Non-ACEA manufacturers and body builders absent (approx. 20% of market)
Known limitations 3Only primary data for some multi-stage vehicles (gaps filled with group averages)
Known limitations 4Based on production date; official statistics use registration date (timing mismatch)
DATA: ACEA & Sioux Technologies, "Bus and coach CO2 emissions — Analysis of heavy buses produced by ACEA manufacturers in Q2/Q3 2024" (June 2026) · Regulation (EU) 2024/1610 amending (EU) 2019/1242 · Registration data: Chatrou CME Solutions via Sustainable Bus (FY2024/FY2025) · Daimler Truck press releases (eIntouro, Nov 2024 / Oct 2025)
VISUALIZATION: Chexun Zongheng · 2026-06-10 · ECharts 5.4.3 SVG