↑Back to top EU "Made in Europe" public procurement rules for green technologies – data analysis

EU "Made in Europe" public procurement rules for green technologies

Public procurement becomes the EU's core policy tool for localising green technologies

Affected sectors: batteries, solar, wind power, EV components
Act release date: Jan 2026 (next week)
Public procurement accounts for 14% of EU GDP
EU imports 94% of its solar
China's PV capacity 1800 GW vs EU target 30 GW
China's solar exports up 73% in 2025
14%
Public procurement as share of EU GDP
Approx. EUR 1.9–2 trillion/year
94%
EU reliance on solar imports
Local manufacturing only 1%
1,800 GW
China's PV manufacturing capacity in 2025
Over 80% of the global total
60–100x
China–EU manufacturing capacity gap
Stark capacity imbalance

PV manufacturing capacity compared: a huge gap

Key insight:

China's solar PV manufacturing capacity (1,800 GW) is 60 times the EU's 2030 target (30 GW) and more than 1000 times the EU's current capacity (1.7 GW of ingots and wafers).

This huge gap is the main reason the EU is pushing "Made in Europe" rules, and public procurement will be a key tool for boosting domestic demand.
Insight: public procurement is elevated into an "industrial policy lever"
  • From price-driven to supply-chain-driven: public procurement used to focus on value for money and compliance; now it is used as the most direct and controllable tool for stimulating demand
  • Inherent scale and certainty: the public sector is a major buyer of battery storage, public transport electrification, government fleets, public charging networks, solar on public buildings and more
  • Sidestepping subsidy disputes: procurement rules express "preference" through standards and access requirements, which is more sustainable in practice than subsidies
  • Consistent with the "de-risking" narrative: reduce dependence on supply chains in any single third country, with public procurement seen as the lever that can be activated fastest

EU dependence on solar imports

Data notes:

The EU relies on imports for about 94% of its solar panel demand, with imports from China dominant.

In the first 9 months of 2025, the EU imported 84 GWp of PV modules from China, up 8% year on year, with the full-year total expected to reach 100 GW.

China's solar cell exports grew 73% in 2025.
Insight: this is not "minor tweaks to green procurement" but "industrial restructuring"
  • From cost to industrial prosperity: the EU is trying to turn the climate transition from a cost item into an engine of industrial prosperity, with public procurement becoming the entry threshold for orders
  • Shift in competition: green-tech competition is partly moving from "who is cheaper" to "whose supply chain is more European"
  • Knock-on effects: on batteries, key solar and wind components, EVs and their supporting infrastructure

Global PV manufacturing capacity by region, 2025

Trend analysis:

China controls more than 80% of global solar PV manufacturing capacity. The US reached 50 GW of module manufacturing capacity in 2025, a milestone, and India added 44.2 GW of module capacity in the first half of 2025.

The EU, US and India are all pushing for domestic manufacturing, but China's dominance is unlikely to change in the short term.
Insight: regulatory spillover reaches into the private market
  • Locked in at the infrastructure layer: solar, wind, low-carbon industrial products, the grid and charging infrastructure all sit in the "infrastructure layer" of the energy transition
  • EPC contractors: need to reshape their supplier base so they can provide "proof of European origin" at bid stage
  • Equipment suppliers: must either manufacture/assemble in Europe or meet the threshold through joint ventures, licensed manufacturing or localised modules
  • Private market follows: bank financing, insurance terms and project acceptance will also reference the same compliance criteria

Trends in EU solar module imports from China

Import data:

2024: EU imported about 60-70 GW of PV modules from China
First 9 months of 2025: 84 GWp (+8% year on year)
Full-year 2025 forecast: 100 GW

Despite Europe's push for localization, imports are still growing, showing strong European demand that local capacity struggles to meet.
Insight: how companies respond, turning "localization" from a cost item into a capability
  • Build a component-level origin register: battery systems, BMS, key electrical parts, power modules, structural parts and more, with the evidence chain and auditable documentation prepared in advance
  • Build localisation into the product roadmap: not finding a contract manufacturer at the last minute, but splitting modules and standardising interfaces so localisation can be replicated quickly
  • Reassess partnership strategy: joint ventures, licensed manufacturing, joint certification and joint bidding will be more effective than going it alone
  • Watch the technical clauses in tender documents: the public sector turns abstract policy requirements into detailed specifications, and whoever understands the language of tenders first wins orders first

Policy tools and implementation mechanisms

Policy tools Content Expected impact
Minimum local content requirement Public procurement must meet a minimum "Made in Europe" share Stimulate demand for domestic manufacturing
Priority procurement rules Prioritize products made in EU member states Strengthen EU product competitiveness
Fast-track permitting Fast-track permitting for some manufacturing projects Shorter project build times
Supply chain oversight Strengthen supply chain transparency and traceability Stronger supply chain security
Insight: battery rules are the most specific and actionable
  • Timeline + component list: about 12 months after the regulation takes effect, EU assembly and EU-sourced key components such as the BMS are required; at about 24 months the rules tighten further, with cells and other upstream stages brought under stricter requirements
  • A clear compliance path: Where is it assembled? Where does the BMS come from? How is the value share of core components calculated? How should the chain of evidence be prepared? Break it down into verifiable engineering questions
  • Short adjustment window: talk of "European localisation" used to stay at the level of broad direction; public procurement now turns it into concrete compliance requirements
  • Batteries are the top priority: the signal is very strong; batteries are no longer just about "product competition" but are "compliant supply chain products"

Affected areas and current status

Technology area Status and challenges Policy objective
Solar panels EU holds about 1% of capacity and relies on imports for 94% 30 GW of manufacturing capacity by 2025
Batteries China dominates global supply chains Stimulating domestic demand through public procurement
Wind turbines Europe has some foundation but faces competition Prioritize EU-made products
EV components Chinese brands' market share growing rapidly Strengthen supply chain resilience
Insight: bring foreign investment under the same set of thresholds
  • Extension to investment: foreign investments above EUR 100 million in strategic sectors may be subject to strict conditions, such as using European-made components and meeting EU labour requirements
  • Market entry barriers: not just what to sell and where, but also how to invest, hire and build supply chains in Europe
  • Industrial security made institutional: The EU is turning "industrial security" into a formal system. Products, orders and investment approvals are being tightened at the same time, closing the loop.

Arguments for and against

Arguments in favor:
• Helps strengthen EU domestic manufacturing and reduce external dependence
• Can counter China's market dominance in green technologies
• Improves supply chain resilience and security
• Aligns with the goal of "Strategic Autonomy"

Arguments against / concerns:
• Some EU member states worry it could raise procurement costs
• EU-made products are generally more expensive than imports
• China is concerned such measures undermine corporate investment confidence (response on Jan 19, 2026)
• Industry views hold that Europe's solar industry needs to be rebuilt pragmatically
Insight: member-state divisions will determine how strict the rules are
  • How "European-made share" is calculated: by value? By a list of key components? By final assembly? Different methods lead to completely different industrial impacts
  • How enforcement and auditing work: The biggest risk in public procurement is rules that are strict but evidence chains that are hard to verify, so they end up either as a box-ticking exercise or slowing projects down
  • Exemptions and transition periods for foreign investment and multinational supply chains: too aggressive, and Europe's own ability to deliver projects takes a direct hit; too lenient, and the policy fails to achieve its "de-risking" goal

Policy background and trends

Policy background:
• This is part of the EU's "de-risking" strategy
• The EU previously adopted the Net-Zero Industry Act to counter competition from Chinese renewable energy companies
• Global green supply chains are being restructured, with both Europe and the US pushing domestic manufacturing

Outlook:
• EU–China competition in green technology will become more complex
• Trade friction is increasing, but the two sides still need to cooperate on climate change
• Balancing competition and cooperation will be a key issue in the coming years
• Public procurement rules will become a core tool of EU industrial policy
Insight: the rules of the game are shifting from "product-led" to "supply chain-led"
  • No longer content to be just a "market": the EU wants to become a "manufacturing hub" again; public procurement is only the entry point to a larger industrial rebalancing
  • From product-driven to supply-chain-driven: whether companies can turn localisation into a capability that is deliverable, auditable and replicable will decide who keeps winning incremental orders in Europe in the next phase
  • From cost item to capability: For companies running green-tech businesses in Europe, turning localisation from a cost item into a capability is the most realistic response
Main sources:

1) Reuters – EU plans ‘made in Europe’ rules for public purchases of green tech (January 19, 2026)
2) ESG News – EU Plans Local Content Rules For Green Tech Procurement
3) MLex – EU plans tougher local-content rules, supply chain oversight in draft law
4) Ember Energy – China solar cell exports grow 73% in 2025
5) SolarPower Europe – Global Market Outlook for Solar Power 2025-2029
6) PV Tech – Global solar module manufacturing capacity to reach 1.8TW in 2025
7) Intereconomics – Green Public Procurement: A Neglected Tool in the European Green Deal Toolbox
8) European Commission – Public Procurement Factsheet
9) European Solar Manufacturing Council – Towards 30 GW of PV Manufacturing in Europe
10) Innoenergy – Rebuilding Europe’s solar industry requires a pragmatic reset

Disclaimer: This page is for information and reference only; data may change over time. Please refer to official announcements and technical data sheets.